Raritan PX3-4000 series, User Manual

Page: 171 / 688

Chapter 6: Using the Web Interface
150

Type the URL or host name in the accompanying text box.
4. If the destination server requires authentication, select the "Use
authentication" checkbox, and provide the authentication information:

In the "User name" field, type the login name.

In the Password field, type the login password.
5. In the "Entry type" field, determine the data that will be transmitted.

Asset management information: Transmit the information of the
specified asset sensor(s), including the general status of the
specified sensor(s) and a list of asset tags on blade extension
strips if any.

Asset management log: Transmit the log of all asset sensors,
which is generated when there are changes made to asset tags
and asset sensors, including asset tag connection or
disconnection events.
6. If "Asset management information" is selected in the above step,
specify the asset sensor(s) whose log to send. The PX has only one
FEATURE port so only one asset sensor is available.

To specify the asset sensor, select it in the Available list box and
click (Add) or (Add All).

To remove the asset sensor, select it in the Selected list box and
click (Remove) or (Remove All).
7. Click OK.
Specifying the Device Altitude
You must specify the PX device's altitude above sea level if a Raritan
differential air pressure sensor is attached. This is because the device's
altitude is associated with the altitude correction factor. See
Altitude
Correction Factors
(on page 645).
The default altitude measurement unit is meter. You can have the
measurement unit vary between meter and foot according to user
credentials. See
Setting Up Your Preferred Measurement Units
(on
page 159).
To specify the altitude of the PX device:
1. Click the PDU folder.
Note: The folder is named "my PX" by default. The name can be
customized.
2. Click Setup in the Settings section. The Pdu Setup dialog appears.
3. Type an integer number in the Altitude field. Depending on the
measurement unit displayed, the range of valid numbers differs.