Chapter 8: Using the Command Line Interface
433
Enabling or Disabling Front Panel Outlet Switching
This section applies to outlet-switching capable models only.
The following CLI commands control whether you can turn on or off an
outlet by operating the front panel display.
To enable the front panel outlet control feature:
config:#
security frontPanelPermissions add switchOutlet
To disable the front panel outlet control feature:
config:#
security frontPanelPermissions remove switchOutlet
Enabling or Disabling Front Panel Actuator Control
This section applies to PX3 phase II models only. A PX3 phase I
model does NOT support this feature.
The following CLI commands control whether you can turn on or off a
connected actuator by operating the front panel LCD display.
To enable the front panel actuator control feature:
config:#
security frontPanelPermissions add switchActuator
To disable the front panel actuator control feature:
config:#
security frontPanelPermissions remove switchActuator
Tip: If your PDU supports multiple front panel permissions, you can
combine them into one command by adding a semicolon (;) between
different permissions. For example, the following CLI command enables
both front panel actuator control and outlet switching functions
simultaneously.
security frontPanelPermissions add
switchActuator;switchOutlet
Examples
This section illustrates several security configuration examples.
Summary of Contents for PX3-4000 series
