Raritan PX3-4000 series, User Manual

Page: 509 / 688

Chapter 8: Using the Command Line Interface
488
Setting an LED Color for a Rack Unit
This command syntax sets the LED color for a specific rack unit on the
specified asset sensor. You need to set a rack unit's LED color only
when the LED operation mode of this rack unit has been set to "manual."
config:# rackUnit <n> <rack_unit> LEDColor <color>
Variables:
 <n> is the number of the FEATURE port where the selected asset
sensor is physically connected. For the PX device with only one
FEATURE port, the number is always 1.
 <rack_unit> is the index number of the desired rack unit. The index
number of each rack unit is available on the Asset Strip page of the
web interface.
 <color> is the hexadecimal RGB value of a color in HTML format.
The <color> variable ranges from #000000 to #FFFFFF.
Note: A rack unit's LED color setting overrides the global LED color
setting on it. See
Setting LED Colors for Connected Tags (on page
485) and Setting LED Colors for Disconnected Tags (on page 486).
Setting an LED Mode for a Rack Unit
This command syntax sets the LED mode for a specific rack unit on the
specified asset sensor. You need to set a rack unit's LED mode only
when the LED operation mode of this rack unit has been set to "manual."
config:# rackUnit <n> <rack_unit> LEDMode <mode>
Variables:
 <n> is the number of the FEATURE port where the selected asset
sensor is physically connected. For the PX device with only one
FEATURE port, the number is always 1.
 <rack_unit> is the index number of the desired rack unit. The index
number of each rack unit is available on the Asset Strip page of the
web interface.
 <mode> is one of the LED modes:
on
,
off
,
blinkSlow
or
blinkFast
.
Mode Description
on This mode has the LED stay lit permanently.
off This mode has the LED stay off permanently.
blinkSlow This mode has the LED blink slowly.