Raritan PX3-4000 series, User Manual

Page: 155 / 688

Chapter 6: Using the Web Interface
134
Setting the Date and Time
Set the internal clock on the PX device manually, or link to a Network
Time Protocol (NTP) server and let it set the date and time for the PX.
To set the date and time:
1. Choose Device Settings > Date/Time. The Configure Date/Time
Settings dialog appears.
2. In the Time Zone field, click the drop-down arrow, and select your
time zone from the list.
3. If the daylight saving time applies to your time zone, verify the
Automatic Daylight Saving Time Adjustment checkbox is selected.
If the daylight saving time rules are not available for the selected time
zone, the checkbox is not configurable.
4. Choose one of the methods to set the date and time:

To customize the date and time, select the User Specified Time
radio button, and then enter the date and time in appropriate
fields. Use the yyyy-mm-dd format for the date and the hh:mm:ss
format for the time.

To set the date, delete existing numbers in the Date field and
type new ones, or click the calendar icon to select a
date.

The time is measured in 24-hour format so enter 13 for
1:00pm, 14 for 2:00pm, and so on. You can enter the time by
deleting existing numbers and typing new ones in the hour,
minute and second fields, or clicking the arrows
to
adjust each number.

To let an NTP server set the date and time, select the
"Synchronize with NTP Server" radio button. There are two ways
to assign the NTP servers.