Raritan PX3-4000 series, User Manual

Page: 152 / 688

Chapter 6: Using the Web Interface
131
Tip: You can permit or disallow a user to access the PX via the
SNMP v3 protocol. See
Configuring Users for Encrypted SNMP
v3 (on page 331).
4. Enter the MIB-II system group information, if applicable:
a. sysContact - the contact person in charge of the system being
contacted
b. sysName - the name assigned to the system
c. sysLocation - the location of the system
5. Select the MIB to be downloaded. The SNMP MIB for your PX is
used by the SNMP manager.
Important: You must download the SNMP MIB for your PX to use
with your SNMP manager. Click Download MIB in this dialog to
download the desired MIB file. For more details, see
Downloading
SNMP MIB (on page 337).
6. Click OK.
To configure SNMP notification destinations:
1. Choose Device Settings > Network Services > SNMP. The SNMP
Settings dialog appears.
2. Click the Notifications tab.
3. Select the Enabled checkbox.
4. Select an SNMP notification type - SNMP v2c Trap, SNMP v2c
Inform, SNMP v3 Trap, and SNMP v3 Inform.
5. Specify the SNMP notification destinations by doing the following:
a. Specify the SNMP notification destinations in the Host field(s).
b. Specify a port number for the destination in the Port field(s).
c. Enter necessary information in other fields, such as the
community string for SNMP Trap or authentication pass phrase
for SNMP Inform. See
Send an SNMP Notification
(on page
232) for details.
6. Click OK.
Tip: The SNMP notification destinations can be also set in the Event
Rule Settings dialog. See
Modifying an Action (on page 268).