Raritan PX3-4000 series, User Manual

Page: 140 / 688

Chapter 6: Using the Web Interface
119
Wireless Network Settings
Wireless SSID, PSK and BSSID parameters were set during the
installation and configuration process. You can change them via the web
interface.
Note for USB-cascading configuration: Port forwarding mode over
wireless LAN is supported as of release 3.1.0. You must upgrade all
devices in the chain to version 3.1.0 or later if wireless networking is
preferred. See
Cascading the PX via USB (on page 28).
To modify the wireless interface settings:
1. Choose Device Settings > Network. The Network Configuration
dialog appears.
2. The Interface Settings tab should have been selected. If not, click the
Interface Settings tab.
3. In the Network Interface field, click the drop-down arrow, and select
Wireless from the list.
4. Check the Hardware State field to ensure that the PX device has
detected a wireless USB LAN adapter. If not, verify whether the USB
LAN adapter is firmly connected or whether it is supported. See
Connecting the PX to Your Network
(on page 20).
5. Type the name of the wireless access point (AP) in the SSID field.
6. If the BSSID is available, select the Force AP BSSID checkbox, and
type the MAC address in the BSSID field.
Note: BSSID refers to the MAC address of an access point in the
wireless network.
7. In the Authentication field, select an appropriate option from the
drop-down list.
Options Description
No Authentication Select this option when no authentication data is
required.
PSK A Pre-Shared Key is required for this option.

In the Pre-Shared Key field, type the PSK
string.