Raritan PX3-4000 series, User Manual

Page: 492 / 688

Chapter 8: Using the Command Line Interface
471
config:# sensor ocp <n> <sensor type> assertionTimeout <as_value>
Variables:
 <n> is the number of the overcurrent protector that you want to
configure.
 <sensor type> is one of the following sensor types:
Sensor type Description
current Current sensor
Note: If the requested sensor type is not supported, the "Sensor is
not available" message is displayed.
 <option> is one of the options:
enable
,
disable
or a numeric value.
Option Description
enable Enables the specified threshold for the
overcurrent protector sensor.
disable Disables the specified threshold for the
overcurrent protector sensor.
A numeric
value
Sets a value for the specified threshold of the
overcurrent protector sensor and enables this
threshold at the same time.
 <hy_value> is a numeric value that is assigned to the hysteresis for
the specified overcurrent protector sensor. See
"To De-assert" and
Deassertion Hysteresis
(on page 653).
 <as_value> is a number in samples that is assigned to the assertion
timeout for the specified overcurrent protector sensor. See
"To
Assert" and Assertion Timeout
(on page 651).
Commands for Environmental Sensors
A sensor threshold configuration command for environmental sensors
begins with
sensor externalsensor
.
You can configure various environmental sensor threshold settings at a
time by combining multiple commands. See
Multi-Command Syntax
(on page 491).
Set the Upper Critical threshold for an environmental sensor:
config:# sensor externalsensor <n> <sensor type> upperCritical <option>
Set the Upper Warning threshold for an environmental sensor: