Raritan PX3-4000 series, User Manual

Page: 401 / 688

Chapter 8: Using the Command Line Interface
380
config:# cancel
The # or > prompt appears after pressing Enter, indicating that you have
entered the administrator or user mode. See
Different CLI Modes and
Prompts
(on page 345).
PDU Configuration Commands
A PDU configuration command begins with
pdu
. You can use the PDU
configuration commands to change the settings that apply to the whole
PX device.
Changing the PDU Name
This command changes the PX device's name.
config:# pdu name "<name>"
Variables:
 <name> is a string comprising up to 32 ASCII printable characters.
The <name> variable must be enclosed in quotes when it contains
spaces.
Setting the Outlet Relay Behavior
This section applies to outlet-switching capable models only.
This command syntax determines the relay behavior of all outlets on a
PX model.
config:# pdu relayBehaviorOnPowerLoss <option>
Variables:
 <option> is one of the options:
latching
or
nonLatching
.
Note: For more information on the outlet relay behavior, see PX3
Latching Relay Behavior (on page 192).