Raritan PX3-4000 series, User Manual

Page: 206 / 688

Chapter 6: Using the Web Interface
185
Gathering the LDAP Information
It requires knowledge of your LDAP server and directory settings to
configure the PX for LDAP authentication. If you are not familiar with the
settings, consult your LDAP administrator for help.
To configure LDAP authentication, you need to check:
 The IP address or hostname of the LDAP server
 Whether the Secure LDAP protocol (LDAP over TLS) is being used

If Secure LDAP is in use, consult your LDAP administrator for the
CA certificate file.
 The network port used by the LDAP server
 The type of the LDAP server, usually one of the following options:

OpenLDAP

If using an OpenLDAP server, consult the LDAP
administrator for the Bind Distinguished Name (DN) and
password.

Microsoft Active Directory
®
(AD)

If using a Microsoft Active Directory server, consult your AD
administrator for the name of the Active Directory Domain.
 Bind Distinguished Name (DN) and password (if anonymous bind is
NOT used)
 The Base DN of the server (used for searching for users)
 The login name attribute (or AuthorizationString)
 The user entry object class
 The user search subfilter (or BaseSearch)
Gathering the RADIUS Information
To configure RADIUS authentication, you need to collect the RADIUS
information. If you are not familiar with the remote RADIUS information,
consult your RADIUS administrator for help.
Below is the RADIUS information to gather:
 The IP address or host name of the RADIUS server
 Authentication protocol used by the RADIUS server
 Shared secret for a secure communication
 UDP authentication port used by the RADIUS server
 UDP accounting port used by the RADIUS server