Chapter 8: Using the Command Line Interface
421
Restricted Service Agreement
The CLI command used to set the Restricted Service Agreement feature
begins with
security restrictedServiceAgreement
,
Enabling or Disabling the Restricted Service Agreement
This command activates or deactivates the Restricted Service
Agreement.
config:#
security restrictedServiceAgreement enabled <option>
Variables:
<option> is one of the options:
true
or
false
.
Option
Description
true
Enables the Restricted Service Agreement
feature.
false
Disables the Restricted Service Agreement
feature.
If the Restricted Service Agreement feature is enabled, the Restricted
Service Agreement is displayed when any user logs in to the PX. Do
either of the following, or you cannot successfully log in to the PX:
In the web interface, select the checkbox labeled "I understand and
accept the Restricted Service Agreement."
Tip: To select the agreement checkbox using the keyboard, press
the Space bar.
In the CLI, type
y
when the confirmation message "I understand and
accept the Restricted Service Agreement" is displayed.
Specifying the Agreement Contents
This command allows you to create or modify contents of the Restricted
Service Agreement.
config:#
security restrictedServiceAgreement bannerContent
After performing the above command, do the following:
1. Type the text comprising up to 10,000 ASCII characters when the
CLI prompts you to enter the content.
2. To end the content:
a. Press Enter.
Summary of Contents for PX3-4000 series
