Raritan PX3-4000 series, User Manual

Page: 250 / 688

Chapter 6: Using the Web Interface
229
Push Out Sensor Readings
If you have connected Raritan's asset sensors to the PX, you can
configure the PX to push asset sensor data to a remote server after a
certain event occurs.
Before creating this action, make sure that you have properly defined the
destination servers and the sensor data type in the Data Push dialog.
See
Configuring Data Push Settings
(on page 149).
Tip: To send the asset sensor data at a regular interval, schedule this
action. See
Scheduling an Action (on page 248). Note that the "Asset
management log" is generated only when there are changes made to
any asset sensors or asset tags, such as connection or disconnection
events.
To push out the sensor data:
1. Choose Device Settings > Event Rules. The Event Rules Settings
dialog opens.
2. Click the Actions tab.
3. Click New.
4. In the "Action name" field, type a new name for the action. The
default name is New Action <number>, where <number> is a
sequential number starting at 1.
5. In the Action field, click the drop-down arrow and select the desired
action: Push out sensor readings.
6. Select a server or host which receives the asset sensor data in the
Destination field.

If the desired destination is not available yet, go to the Data Push
dialog to enter it. See
Configuring Data Push Settings
(on
page 149).
7. Click OK.
Request LHX/SHX Maximum Cooling
If Schroff LHX/SHX Support is enabled, the LHX/SHX-related actions will
be available. See
Enabling and Disabling Schroff LHX/SHX Heat
Exchanger Support
(on page 316).
The "Request LHX/SHX Maximum Cooling" action applies the maximum
cooling to the SHX-30 device only.
To request maximum cooling for SHX-30:
1. Choose Device Settings > Event Rules. The Event Rules Settings
dialog opens.
2. Click the Actions tab.
3. Click New.