System Messages and Alarms
X
— alarm was acknowledged and stopped in the same time;
Empty
— no changes.
Column 3
— alarm type.
Possible values are:
I
— info;
W
— warning;
A
— alarm;
CR
— critical error.
Column 4
— is the alarm acknowledged or not.
Possible values are:
U
— the alarm is acknowledged;
*
— the alarm is not acknowledged.
Column 5
— control station ID.
Possible values are:
A
— the alarm is active on CCA;
B
— the alarm is active on CCB;
AB
— the alarm is active both on CCA and CCB;
dash
— the alarm is not active.
Column 6
— alarm date in format mm.dd.yy.
Column 7
— time of last change in alarm (acknoledgement, becoming inactive, etc.).
Column 8
— alarm start time.
Column 9
— alarm message.
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”
62
