NAVIS NavDP 4000. Operation Manual
Figure 8.33: The ATW type view
8.8.9.2
TW Parameters
The window contains the TW location set up (see figure 8.34).
Figure 8.34: TW Parameters
The weight is set in the similar way as the GPS weight.
8.8.9.3
TW Plot
The window contains plot (see figure 8.35) with the following parameters displayed:
– vessel outline
– depressor weight position
– horizontal projection of the wire (from gimbal head to depressor weight)
– boundaries of the zone accessible with the given wire lenght
8.8.9.4
TW Graph
This window displays changes of the selected parameter (outboard angle/ rightward angle/ wire lenght) (see figure
To open the settings dialog (see figure 8.37) press on the graph area.
The following keys are used for the parameters:
TW Alpha
- outboard angle
157
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”
