NAVIS NavDP 4000. Operation Manual
3.2
Starter Menu
In normal operation, all the control systems (DP and IJ) must be switched on.
After the control system is switched on (DP and IJ), and “Start DP” option will be selected, loading DP window
appears (see Figure 3.1).
Figure 3.1: DP Loading Window
And in few seconds the Main Screen appears on the monitor (Figure 3.2):
Figure 3.2: Starter Main menu
You then use a menu and select from:
– Real Mode
– Simulator Mode
– Services
– Shut Down
Select
Shut Down
, if you are going to switch the control system off.
In case there is no any work station the system will shut down.
In case the system has several work stations the following submenu will be displayed:
– Figure 3.3 in case the work station is assosiated with the control computer
– Figure 3.4 in case of the separate work station
The submenu items means:
Computer
(in case an assosiated work station) — the control computer, all depended work stations and proper PLC will
be switched off;
Workstation
(in case of separate work station) — only the work station will be switched off;
51
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”
