System Hardware Configuration
Figure 2.21: The Group of Controls
– With the Knob match buttons (see Figure 2.22): press and hold the pushbutton or press the pushbutton several times
to get the necessary value. Then press the Enter pushbutton.
– with rotary knob (see Figure 2.23) — turn the knob to get necessary value, then press the Enter pushbutton.
Figure 2.22: Knob Match
Figure 2.23: Rotary Knob
NOTE!
The HDG settings dialog is called in any control mode by the single
pressing the HDG pushbutton.
To switch off the AutoHDG mode press the HDG pushbutton twice.
2.5.11
POS
The POS pushbutton is availavle in the DP mode only it’s meant for selecting the Auto Position (AutoPOS) control
mode.
There two way of switching on the AutoPOS mode:
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”
36
