NAVIS NavDP 4000. Operation Manual
(a) Track Parameters
(b) Alarm Parameters
Figure 10.40: Track Following/Alarm Parameters Window
Figure 10.41: Active Route Window
– Across Speed, m/s;
– Heading Strategy (along leg or table).
Set the parameters of alarms in the “Track Alarm Parameters” window (“Alarm” softkey):
– Off Track Limit, m;
– WP Predict Alarm (on/off);
– WP Predict Alarm Time, if WP predict alarm is on.
Press
Apply
softkey if the changes should be applied,
Cancel
if should not or
Defaults
if the default values should be
set.
10.6.3.3
Active Route
Press
Active
softkey to switch to
Active Route
mode.
The window contains the waypoint list of an active route (see Figure 10.41).
The following information is displayed for each waypoint:
WP
— the sequence number of the waypoint;
197
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”
