Sensors and Ref-Systems Raw Data
a
— Alarm condition (H = alarm state, threshold exceeded, N = normal state)
a
— Alarm’s acknowledgement state (A = acknowledged, V = not acknowledged)
c–c
— Alarm’s description text (alarm’s source alarm’s ID)
hh
— Checksum
Example
$RCALA,122644.57,OT,DP,,1425,N,A,|CP_0_SOFTWARE_UPDATE_STARTED*74
ALR Message: Set Alarm State
The message format:
$--ALR,hhmmss.ss,xxx,A,A,c--c*hh
where
hhmmss.ss
— Time of an alarm condition change, UTC
xxx
— Unique alarm number (identifier) in an alarm source
A
— Alarm condition (A = threshold exceeded, V = not exceeded)
A
— Alarm’s acknowledge state (A = acknowledged, V = not acknowledged)
c–c
— Alarm’s description text (alarm’s source alarm’s ID)
hh
— Checksum
Example
$RCALR,134352.18,1703,A,A,A|CPU_A_ACTIVE*74
GLL Message: Geographic Position — Latitude/Longitude
The message format:
$--GLL,llll.ll,a,yyyyy.yy,a,hhmmss.ss,A,a*hh
where
llll.ll
— Latitude
a
— N/S
yyyyy.yy
— Longitude
a
— E/W
hhmmss.ss
— UTC of position
A
— Status (A = data valid, V = data invalid)
a
— Mode indicator (A = Autonomous mode, E = Estimated mode (dead reckoning), N = Data not valid)
hh
— Checksum
Example
$RCGLL,2959.9999,N,08959.9992,W,123315.71,V,E*6E
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”
292
