NAVIS NavDP 4000. Operation Manual
Class DP-1 System Configuration
The
NAVIS NavDP 4000
typical hardware configuration for IMO Class DP-1 System is presented in Figure 2.2. The
configuration contains two control systems — IJ and DP and the following sensors:
– Gyro — 2
– DGPS — 2
– Wind — 2
– VRS — 2
– HPR — 1
– LR — 1
All sensors are connected to the DP Control Unit via the DP Operator station junction box. Some of them (e.g. Gyro,
DGPS, Wind) are also connected to the I Control Unit via the IJ operator station junction box. The Thruster system is
connected to the both Control units.
Control transfer between the
NAVIS NavDP 4011
and
NAVIS NavDP 4001
is performed manually by means of the
Mode Selector which is supplied together with
NAVIS NavDP 4000
.
17
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”
