NAVIS NavDP 4000. Operation Manual
In
Simulator Mode
use Param window (view SIMUL) to change Environment Conditions.
You can change the following parameters:
– Wind speed
– Wind direction
– Current speed
– Current direction
– Water depth
– Wave height
– Wave direction
The range of admissible values for each parameters is indicated below.
You can change also commands for not-in-DP propellers (simulating bridge control of propellers – only for
Autopilot
mode
).
247
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”
