NAVIS NavDP 4000. Operation Manual
Figure 10.66: Example of the Dialog Box for Current Direction/Speed Settings
Wind
Press
Change
softkey to set a new value for the wind direction.
In the opened dialog box (see Figure 10.67):
– select the wind direction value:
– enter a new value in degrees in the
DIR
field or
– press
Hold
softkey to enter present value for the wind direction;
– press
OK
softkey to apply the choice and leave the dialog box. In case an incorrect value is entered for the wind
direction,
OK
softkey is unavailable.
Press
Cancel
softkey to leave the dialog box without any changes.
Figure 10.67: Example of the Dialog Box for Wind Direction Setting
215
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”
