Sensors
Figure 7.18: Draft sensor. Fragment of sensors window
If draft/load sensor is present, in “all sensors window” loading and draft info is shown (see figure 7.18). If there is no
draft sensor, but
NAVIS NavDP 4000
is configured with “variable draft” option, manual input of draft/loading is allowed
(see Sections 7.3.5.2, page 136, 7.3.5.4, page 137).
The top of the Draft Details window is shown in Figure 7.19.
Figure 7.19: Draft sensor details
7.3.5.2
Manual draft value
Operator can change mean draft value manually. Optionally, operator input not draft but loading in tons (it is config-
ured for each system).
Press
Change
softkey to show the draft/loading input dialog – see Figure 7.20.
When operator press
Ok
, value of displacement and loading corresponded the entered data are updated.
Figure 7.20: Input Manual Draft/Loading Value Dialog Example
7.3.5.3
Used draft
Used draft is sensor processed data or manual value. Press
Manual
/
Sensor
softkey to select the source of draft
information.
When there are some problems with draft sensor and processing status of draft sensor is red, source is automatically
switched to “manual”.
Indicator
shows which data is used – sensor or manual.
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”
136
