System Functions
Wave
In
Auto
mode the wave direction matches the wind direction and the wave height is calculated by the system as a
function of the wind speed (see Figure 10.82). In this case
Auto
softkey is highlighted by white color and
Change
softkey
is unavailable.
Press the
Auto
softkey, so the
Change
softkey becomes available. Press the
Change
softkey for manual input of the
wave parameters (direction and height).
In the opened dialog box (see Figure 10.81):
– select the wave direction value:
– enter a new value in degrees in the
DIR
field or
– press
Hold
softkey to enter present value for the wave direction;
– press
H
softkey and enter a new value for the wave height in the corresponding field;
– press
OK
softkey to apply the choice and leave the dialog box. In case incorrect values are entered for the wave
direction/height,
OK
softkey is unavailable.
Press
Cancel
softkey to leave the dialog box without any changes.
Figure 10.81: Example of the Dialog Box for Wave Direction/Height Settings
The values for wave direction and height calculated by the system are
displayed under the
Wave
text in the
Auto
mode.
The values for wave direction and height set in the dialog box are dis-
played under the
Wave
text in the manual mode.
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”
226
