NAVIS NavDP 4000 Series, Operation Manual

Page: 266 / 348

NAVIS NavDP 4000. Operation Manual
Meaning Maximum allowable difference between the actual position
and desired position. If the limit is exceeded, an alarm is
produced.
Mode
All auto position control modes
Values 1.0, 2.0, 3.0, 5.0, 10.0,...30.0
Editing/ Viewing
POSN
SPEED VECTOR GAIN
Meaning Controller gain while Speed Vector control
Mode Speed Vector
Values 1–10
Editing/ Viewing POSN
Hold Area Parameters
FORE-AFT SPEED
Meaning Maximum allowable vessel’s speed in the surge direction in
the Hold Area mode.
Mode Hold Area
Values From 0.010 m/s
Editing/ Viewing Hold Area
ATHWARTSHIPS SPEED
Meaning Maximum allowable vessel’s speed in the sway direction in
the Hold Area mode.
Mode Hold Area
Values From 0.010 m/s
Editing/ Viewing Hold Area
HOLD AREA GAIN
Meaning Gain of the hold area controller
Mode Hold Area
Values 1–10
Editing/ Viewing Hold Area
HOLD AREA RADIUS
Meaning
Maximum area radius
Mode Hold Area
Values
1–10000 m
Editing/ Viewing Hold Area
WARNING RADIUS
Meaning % of the Hold Area Radius. An alarm is generated in case
the vessel approach to this radius.
Mode Hold Area
Values 10–100 %
Editing/ Viewing Hold Area
STOP RADIUS
265
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”