DPShell Service Utility
2.4.1 Use rotary knob rotation or pressing arrow buttons for navigation through the menu (see Section 2.4.11,
page 29).
2.4.2 When you select “Service” item press the rotary knob.
2.5. Enter password “16” using a screen keyboard and press “OK” (use knob rotation or arrow buttons for navigation)
(see Figure G.14).
Figure G.14: DPShell. Enter password
If you entered wrong password, “Operation ‘Choose User-Level’ completed with error(s)” message will appear.
Press “Close” button and follow steps from item 2.4.
2.6. When you enter a correct password service menu will appear (see Figure G.15).
Figure G.15: DPShell Service menu
G.2.3
Leaving the Service Menu on DP/IJ Control Station
2.1. DP/IJ control computer is in service menu (see Figure G.15).
2.2. To leave a service menu:
2.2.1 Close an active window (if any) by pressing “Done” button (use arrow buttons for navigation).
2.2.2 Press “Return” item in menu “Services”.
2.2.3 If “Unmount USB” item is displayed in the start screen press this item for safe removing of the USB flash
drive:
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”
312
