System Functions
Figure 10.35: Edit Leg window
4. To delete selected waypoint press
DEL Point
softkey (see Figure 10.34).
To select a point, use the arrow softkeys.
5. To edit the strategy of leg passing press
Edit Leg
softkey (see Figure 10.35).
Set the following parameters for the leg if necessary (see Figure 10.36):
– vessel heading;
– waypoint passing strategy;
– radius;
– vessel speed.
(a) Heading
(b) Radius
(c) Speed
Figure 10.36: Parameter Setting for the Custom Leg
To exit from the
RT Edit
mode press either
Apply
softkey if the changes should be applied or
Cancel
if should not
(see Figure 10.37).
NOTE!
An active route is not allowed to edit in the most of system configura-
tions.
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”
194
