mori seiki ZL-153, Operation Manual

Page: 518 / 561

F-34 PREPARATION BEFORE STARTING MASS PRODUCTION
9-3 Operation Flow
The operation flow to use the load monitoring function is described below.
If the machine stops or an alarm message is displayed during load monitoring, check the
contents of the alarm and take appropriate corrective action.
Start of Operation
Execute teaching?
Execute the program for load monitoring
Create the program for load monitoring
Page F-35 (9-4)
Select the "TEACHING" mode on the
LOAD MONITOR screen
Page F-37 (9-5)
The reference data for load
monitoring is stored
Execute monitoring?
Set the mode selection to "no mode" on
the LOAD MONITOR screen
Page F-37 (9-5)
Select the "MONITORING" mode on the
LOAD MONITOR screen
Page F-37 (9-5)
Detected data is compared to the set data
and necessary processing is executed
Execute the program for load monitoring
End of Operation
Set the data on the LOAD MONITOR
SETTING screen
Page F-38 (9-6)
Yes No
No Yes
NOTE