PROGRAM EDITING D-7
3-1
Program Number Search
The program search function can be used in the edit mode or the memory mode.
This function is used to locate the program to be edited in the edit mode and the program to be
executed during automatic operation in the memory mode.
This function is also used to search for the head of a program.
*
In the edit mode or if background editing is selected, if the
[O SEARCH]
soft-key is
pressed after inputting an unregistered program number, a program of the input
program number is newly created.
When the memory mode is selected, if the
[O SEARCH]
soft-key is pressed after
inputting an unregistered program number, the message "PROGRAM NUMBER NOT
FOUND." is displayed.
1.
The program number search operation is also possible for background edit
operation.
2.
The program already called in foreground cannot be called in background.
3.
In background editing, two programs may be called in the same manner.
Start of Operation
End of Operation
MODE selection switch:
(EDIT)
(MEM)
Function selection key:
(PROG)
PROG
Soft-key:
[O SEARCH]
Program number*
The specified program is displayed
on the screen from the beginning
Function selection key:
(PROG)
PROG
Soft-key:
[PROG. LIST]
Input key:
(INPUT)
PROGRAM directory screen
Select the desired program using the
cursor control keys
and
PROGRAM (edit/memory) screen
Selection of
program number search
method
PROGRAM (edit/memory) screen
<Program number>
<Selection from the program directory>
HEAD CHANGE switch:
(head 1)
(head 2)
1
2
NOTE
NOTE
