CHUCKING C-27
4
AUTOMATIC SOFT-JAW SHAPING
This section describes automatic cutting of soft jaws.
For the items to be attended to and confirmed, refer to page C-9 (3).
Before shaping soft jaws, set the tool geometry offset data and the work offset data. If
automatic soft-jaw shaping cycle is executed without setting the offset data, the tool will
interfere with the soft jaw or the chuck to cause damage to the tool or the machine.
For the setting procedure of the tool geometry offset data and work offset data, refer to
chapter E "SETTING OF COORDINATE SYSTEM".
1)
Return the X- and Z-axes to the zero point.
2)
Display the JAW CUT screen.
CAUTION
