B-24 MANUAL OPERATION
6)
Set the feedrate to be used for jog feed operation
using the OVERRIDE dial.
For the relationship between the OVERRIDE
dial setting and actual feedrate, refer to page
When the OVERRIDE dial is placed in the
0
position, the axis is not fed even when an AXIS
DIRECTION switch is pressed.
7)
Press and hold down the AXIS DIRECTION switch
for the axis to be fed.
The axis is fed at a jog feedrate while the switch is
held down.
To stop axis feed, release the switch.
For the C-axis jog feed operation, refer to page
B-88 (14-7). (MC type)
OVERRIDE
100
50
150
0
%
NOTE
Z
Z
X
X
AXIS DIRECTION
+B
B
<B-axis (S type)>
<Standard>
