SETTING OF COORDINATE SYSTEM E-25
10)
With the manual door type machine, press the
DOOR UNLOCK switch
to unlock the front
door. Then open the front door.
With the automatic door type machine, open the
front door by pressing the AUTOMATIC DOOR
OPEN switch.
11)
Check for possible interference when the spindle is
rotated.
<Example>
Interference between the adjacent tools and
chuck (workpiece)
Interference between the fixture and chuck
(workpiece)
12)
After making sure that the spindle can be rotated
without interference, close the front door.
13)
Start the spindle manually, and adjust the spindle
speed as appropriate.
14)
Lightly cut the end of the workpiece in the handle
feed operation.
Move the tool only in the X-axis direction, not in the
Z-axis direction.
With a workpiece whose end face does not need
to be cut, it is not necessary to move the tool in
the X-axis direction. Bring the tool tip into light
contact with the workpiece end face.
15)
Move the cursor to "COMMON Z1" using the cursor
control keys.
a)
Press the function selection key
(OFFSET).
b)
Press the
[WORK]
soft-key.
The WORK OFFSET screen is displayed.
DOOR UNLOCK
NOTE
NOTE
NETWORK
POS
PROG
SYSTEM
MESSAGE
SETTING
OFFSET
CAPS
CAPS
OFFSET
GEOM.
WEAR
SET UP
WORK
MEASURE
(+)
INPUT
1
F
10
F
2
F
3
F
4
F
5
F
6
F
7
F
8
F
9
F
