SETTING OF COORDINATE SYSTEM E-17
22)
Press the
(STOP) switch to stop the spindle.
23)
Retract the turret to the position where the cutting
tool will not interfere with the workpiece when the
turret head is rotated.
24)
Index the turret to the station 3 in which the I.D.
cutting tool is mounted.
25)
Move the cursor to the setting column of "No. 3 Z" of
the tool geometry offset data using the cursor
control keys.
26)
Bring the tool close to the workpiece manually while
observing the clearance between the workpiece and
the tool through the window in the front door.
When the DOOR INTERLOCK key-switch is
placed in the
RELEASE
position, axis movement
is possible even if the front door is open. In this
case, rapid traverse is restricted to 5 m/min.
27)
With the manual door type machine, press the
DOOR UNLOCK switch
to unlock the front
door. Then open the front door.
With the automatic door type machine, open the
front door by pressing the AUTOMATIC DOOR
OPEN switch.
NOR
SPJ
STOP
REV
TURRET
NOTE
DOOR UNLOCK
NOTE
