mori seiki ZL-153 Operation Manual Download Page 208

Page: 208 / 561

A-120 OPERATION PANELS

7-6-3

Alarm History Screen

Function selection key

(MESSAGE)

[ALARM HISTORY]

This screen displays alarms in order from the latest alarm.

Past alarms not displayed in this screen can be checked

by pressing the page selection key

(advance).

The following types of alarm information are displayed.

Date and time

Alarm No.

Alarm message

The right end section of a PLC alarm message

may be omitted at the ALARM HISTORY screen.

If an alarm occurs while the ALARM HISTORY screen is

displayed, the information on the ALARM HISTORY

screen is not updated. To update the displayed alarm

history information, change the screen to any other

screen once then change it back to the ALARM HISTORY

screen. Then, the latest alarm history information is

displayed.

Pressing the

[DATE]

soft-key displays alarms in

maximum of four display pages in the order of occurrence

(date and time).

Pressing the

[KIND]

soft-key displays alarms in two

categories (NC alarm and PLC alarm) in maximum of five

display pages in the order of occurrence (date and time).

Pressing the

[EXEC.]

soft-key after pressing the

[CLEAR]

soft-key clears alarm history.

MESSAGE

NOTE

Summary of Contents for ZL-153


















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ZL-153

Reviews:

Related manuals for ZL-153

Brands by name

Popular brands

mori seiki ZL-153, Operation Manual

Search results

Summary of Contents for ZL-153

Reviews:

Related manuals for ZL-153

Brands by name

Popular brands