A-106 OPERATION PANELS
<Inputting the data>
1)
Insert the memory card that holds desired data to
the card slot.
2)
Press the
[READ]
soft-key.
For inputting the conversational programming data,
the data stored in the memory card is displayed.
3)
On the IN/OUT screen, move the cursor to the data
to be input using the cursor control keys
and
.
4)
Press the
[EXEC.]
soft-key.
The selected data is input to the memory area.
7-5-2
CAP Parameter Screen
Function selection key
(SYSTEM)
[CAP PARAM.]
The CAP parameters can be set and displayed. This screen is used to check the setting of the
CAP parameters by displaying them.
Use the following procedure for parameter search
operation.
1)
Key in the parameter number using the data entry
keys.
2)
Press the
[No. SEARCH]
soft-key.
The page can be also changed using the page
selection keys.
WARNING
The parameters are set on shipment in accordance with the machine
specifications; do not change them without first consulting Mori Seiki. If
you change the parameters without consultation, the machine may
operate in an unexpected manner, causing accidents involving serious
injuries or damage to the machine.
CAP
PARAM.
NC
SYSTEM
SYSTEM
COMPO.
PUNCH
READ
IN/OUT
1
F
10
F
2
F
3
F
4
F
5
F
6
F
7
F
8
F
9
F
SYSTEM