D-38 PROGRAM EDITING
4-9
Replacing Words
This section describes the procedure for replacing words in a program using the soft-keys.
Replacing words includes the following three kinds of operation.
1.
Replacing all of the specified word to a new word
2.
Replacing the specified word to a new word or a block
3.
Replacing the specified word to a new word, one by one
1.
It is possible to select the objective range for the replacement operation by setting
the CAP parameter No. 87.
CAP parameter No. 87 = 0. . . . . . Replacement operation is performed for all
the words and blocks in the selected
program.
CAP parameter No. 87 = 1. . . . . . Replacement operation is performed for the
words and blocks after the cursor position
in the selected program.
This function is valid for the program being edited in the foreground or background.
The CAP parameter No. 87 is set to "0" at shipment.
2.
If "replace all" is executed, all of the specified word in the program are replaced
unconditionally. Before executing this function, ensure that all of the specified words
may be replaced.
3.
If more than one word (word string) is specified for replacement at a time, the
message "STRING NOT FOUND" is displayed.
4.
A word may be replaced with multiple words (word string).
NOTE
