OPERATION PANELS A-11
4-2-3
Power Supply Lamp [POWER SUPPLY] (Option)
This lamp indicates whether or not power is being
supplied to the machine. The lamp is lit when power is
supplied.
If the POWER SUPPLY lamp is not lit although the
power is turned on at the shop power distribution
board, the lamp may have failed. In this case,
replace the lamp using the following procedure.
<Replacing the lamp bulb>
1)
Turn off the power supply at the shop power
distribution board.
2)
Remove the cap; turn it counterclockwise.
3)
Remove the bulb; turn it counterclockwise.
4)
Set the new bulb; turn it clockwise.
5)
Set the cap; turn it clockwise.
6)
Turn on the shop power supply and make sure that
the lamp is lit.
POWER SOURCE
NOTE
3)
2)
4)
5)
