B-48 MANUAL OPERATION
11
CHIP CONVEYOR
The operations relating to the chip conveyor are described here.
Operate the chip conveyor when necessary.
Keep the chip conveyor operating during automatic operation.
If chips accumulate on the chip conveyor, it might be damaged.
1.
Close the front door before operating the chip conveyor.
2.
When operating the chip conveyor, always pay careful attention to the following
three points.
Check if there is any foreign matter on the chip conveyor belt.
Check if too many chips have accumulated on the chip conveyor belt.
Check if there is any abnormal noise during the operation.
The chip conveyor can be operated regardless of the position of the PANEL key-switch and the
selected mode.
1)
Press the
(FOR) switch and the chip conveyor
operates in the forward direction.
The indicator in the switch is lit.
2)
Press the
(STOP) switch while the chip
conveyor is operating and it stops operating.
3)
Press the
(BACK) switch and the chip conveyor
operates in the backward direction.
The chip conveyor operates in the backward
direction only while the switch is held down.
The indicator in the switch is lit during this time.
For purposes such as removing chips that have
become stuck in the chip conveyor, operate the
chip conveyor in the backward direction.
WARNING
Never attempt to reach inside the chip conveyor or put your feet in it while
it is operating. You could be caught in the chip conveyor and seriously
injured.
CAUTION
NOTE
CHIP CONVEYOR
FOR
STOP
BACK
FOR
CHIP CONVEYOR
STOP
BACK
FOR
CHIP CONVEYOR
STOP
BACK
NOTE
