OPERATION PANELS A-81
7
FUNCTION SELECTION KEYS AND DISPLAY SCREENS
This section deals with the screens which are displayed when the function selection keys on the
NC operation panel are pressed.
<Example>
1.
In the explanation given below, the screens
accessible by pressing a function selection key are
indicated as shown to the left.
The screens depicted with
are standard
screens and the one depicted with
is an
optional screen.
2.
Soft-keys are indicated like this:
[KEY-NAME].
3.
indicates the procedure used for displaying
the required screen.
The MC type machines are equipped with the C-axis. Therefore, the coordinate value of
the C-axis is displayed on the screen.
NETWORK
POS
PROG
SYSTEM
MESSAGE
SETTING
OFFSET
CAPS
CAPS
7-2 "Function Selection Key (PROG)"
7-1 "Function Selection Key (POS)"
7-3 "Function Selection Key (OFFSET)"
7-4 "Function Selection Key (CAPS)"
7-8 "Function Selection Key (NETWORK)"
7-7 "Function Selection Key (SETTING)"
7-6 "Function Selection Key (MESSAGE)"
7-5 "Function Selection Key (SYSTEM)"
Operation monitor
Actual position
(ABSOLUTE)
Actual position
(INCREMENTAL)
Actual position
(total position data)
Handle interruption
NOTE
