E-52 SETTING OF COORDINATE SYSTEM
Z1W, Z2W. . . . . . . . . . . . . . . . . . . . . . . Z-axis work shift data that is a sum of Z1WP, Z2WP and
cutting allowance W. This sets the program zero (Z0).
The tool geometry offset data is set in reference to the stylus by bringing the tool tip into contact
with the stylus for which the coordinate values are set with NC parameters (No. 5015 to No. 5018)
as illustrated above.
For the Z-axis work shift data, set the distance between the face C of the stylus and the program
zero (Z0).
