A-108 OPERATION PANELS
<Parameter setting screen>
Function selection key
(SYSTEM)
[NC SYSTEM]
[PARAM]
The system parameters of the CNC can be set and displayed. This screen is used to check the
setting of the system parameters by displaying them.
Use the following procedure for parameter search
operation.
1)
Key in the parameter number using the data entry
keys.
2)
Press the
[NO. SRH]
soft-key.
The entered parameter number appears at the top
of the screen.
The page can be also changed using the page
selection keys.
<CNC internal state display screen>
Function selection key
(SYSTEM)
[NC SYSTEM]
[DGNOS]
This screen is used to check the internal state of the NC unit.
Use the following procedure for self-diagnosis data search
operation.
1)
Key in the required diagnostic number using the
data entry keys.
2)
Press the
[NO. SRH]
soft-key.
The entered diagnostic number appears at the top
of the screen.
The page can be also changed using the page
selection keys.
WARNING
The parameters are set on shipment in accordance with the machine
specifications; do not change them without first consulting Mori Seiki. If
you change the parameters without consultation, the machine may
operate in an unexpected manner, causing accidents involving serious
injuries or damage to the machine.
SYSTEM
SYSTEM
