F-32 PREPARATION BEFORE STARTING MASS PRODUCTION
9-2
Specifications
The following table shows the specifications of the load monitoring function B.
Item
Description
Objective axes
All axes used for cutting
(spindle, rotary tool spindle, X-axis, Z-axis, C-axis, Y-axis)
The objective axes differ depending on the machine model and
specifications.
Monitoring groups
Max. 24 groups (24 intervals)
Programming
(M code)
Start of teaching or monitoring:
M92
End of teaching or monitoring:
M93
Operation modes
Teaching mode and monitoring mode are provided.
For details, refer to page F-33 (9-2-1).
Setting the
threshold levels for
detection of
warning and alarm
The threshold level to detect warning or alarm is set on the LOAD
MONITOR screen.
These values are not automatically set by teaching.
For details, refer to page F-38 (9-6).
NOTE
NOTE
