B-106 MANUAL OPERATION
6)
Display the PARTS CATCHER screen.
The reversed display on the right side of the screen
indicates that the parts catcher is in that status.
The screen shown in the left is for the bucket
specification.
7)
Key in the number heading the required operation.
8)
Press the
(INPUT) key.
When operating the parts catcher in manual
independent operation, always follow the
guidance displayed on the screen.
If you fail to observe this precaution the
machine may operate in an unexpected
manner, and this could cause damage to the
machine.
9)
Press the
[EXEC.]
soft-key.
The parts catcher carries out the selected step.
10)
After completing manual independent operation,
press the
[EXIT]
soft-key.
<Bucket specification>
To operate the parts catcher in manual independent operation, follow the operation sequence
indicated below according to the desired in/out operation.
OUT cycle (spindle 1 side)
7
2
4
1
IN cycle (spindle 1 side)
2
3
6
7
OUT cycle (spindle 2 side)
7
2
5
1
IN cycle (spindle 2 side)
2
3
6
7
NOTE
INPUT
CAUTION
EXEC.
EXIT
1
F
10
F
2
F
3
F
4
F
5
F
6
F
7
F
8
F
9
F
EXIT
EXEC.
1
F
10
F
2
F
3
F
4
F
5
F
6
F
7
F
8
F
9
F
