E-28 SETTING OF COORDINATE SYSTEM
23)
Return the work shift amount set for "COMMON Z1" to "0".
a)
Move the cursor to "COMMON Z1".
b)
Press the
key.
c)
Press the
[INPUT]
soft-key.
Make sure to set "0" for "COMMON Z1" on the WORK OFFSET screen.
If the work coordinate system shift data is set for "COMMON Z1", the work coordinate
system is shifted in the same direction disregarding of the spindle (spindle 1 and
spindle 2) to be used, which causes the turret to interfere with the workpiece resulting
in machine damage.
0
CAUTION
