CHUCKING C-31
The word "S1000" is changed to "S1200".
The modified program remains valid until a new
program is generated again in the soft-jaw cutting
mode.
14)
Press the
(RESET) key.
The cursor moves to the head of the program.
15)
Select the memory mode (
) with the MODE
selection switch.
16)
Press the
(ST) switch.
Soft-jaw shaping cycle starts.
During soft-jaw shaping or in the soft-jaw cutting
mode, it is not allowed to change the following
data.
1.
Soft-jaw shape data
2.
Soft-jaw cutting conditions
3.
Tool change position
NOTE
RESET
MODE
MEM
MDI
TAPE
EDIT
H
JOG
RPD
ZRN
CYCLE
ST
SP
NOTE