SETTING OF COORDINATE SYSTEM E-33
8
SETTING THE COORDINATE SYSTEM USING G50
This section describes the procedure for setting the coordinate system using the G50 coordinate
system setting function.
The coordinate system function called by the G50 command sets the distance from the program
zero point or workpiece zero point (X0, Z0), which is used as the reference point for absolute
programming, to the programmed tool start point of each tool.
It is also possible to specify the clamp speed of the spindle for individual processes.
Before attempting the operation above, follow the operation as explained in 3 "PREPARATION
FOR SETTING THE COORDINATE SYSTEM".
<Command format>
G50 X____Z____S____;
Tool-1
G50
X200.0
Z150.0
Tool-2
G50
X236.0
Z70.0
Tool-3
G50
X200.0
Z27.0
100
40
130
87
18
7
150
70
27
Workpiece
zero point
Tool-3
Tool-2
Tool-1
200 dia.
236 dia.
200 dia.
Turret 1
