B-90 MANUAL OPERATION
4)
Select the spindle (spindle 1 side or spindle 2 side)
to be operated by the HEAD CHANGE switch
(head 1) or
(head 2). (S type)
5)
Select the handle mode (
) with the MODE
selection switch.
6)
Select the C-axis with the axis selection switch.
7)
Press the
(UCL) switch.
The spindle is unclamped.
8)
Set the feed amount per pulse using the axis feed
amount selection switches.
The numbers indicate the multiplication of the
smallest increment (0.001
).
[
1]
0.001
[
10]
0.01
[
100]
0.1
9)
Turn the manual pulse generator in the direction (+/
) in which the selected axis is to be fed.
<Counterclockwise rotation, viewing the
workpiece from the spindle side>
Turn the manual pulse generator clockwise.
In the case of spindle 2, turn the pulse handle
counterclockwise. (S type)
<Clockwise rotation, viewing the workpiece from
the spindle side>
Turn the manual pulse generator counterclockwise.
In the case of spindle 2, turn the pulse handle
clockwise. (S type)
The C-axis moves at the selected speed.
2
1
HEAD CHANGE
2
1
HEAD CHANGE
1
2
MODE
MEM
MDI
TAPE
EDIT
H
JOG
RPD
ZRN
MILLING
SP
UCL
CL
MIL
x1
x10
x100
NOTE
NOTE
