OPERATION PANELS A-125
7-7
Function Selection Key
(SETTING)
The function selection key
(SETTING) is used to display the PCMDI menu and SETTING
menu screen.
<PCMDI menu and setting menu screen>
On the PCMDI menu, the menu is displayed to call
following screens.
OPERATION PANEL screen
ROTARY TOOL screen
PC WORK COUNTER screen (option)
TOOL LIFE MANAGEMENT screen
LOAD MONITOR screen
On the SETTING menu, the menu is displayed to call
following screens.
SETTING screen
TIMER screen
WEEKLY TIMER screen
IN/OUT PARAMETER screen
To change the screen, press the soft-key corresponding to
the screen to be accessed.
It is possible to access the required screen directly
by using the data entry key. For this, input the
menu number of the required screen and press
the
(INPUT)
key.
SETTING
SETTING
1: Operation panel
2: Rotary tool
3: PC work counter
4: Tool life management
5: Load monitor
50: Setting
51: Timer
52: Weekly timer
53: Communication
parameter
INPUT
