Mitsubishi Electric GT15, Connection Manual

Page: 154 / 864

4 - 20
4. HOW TO MONITOR REDUNTANT SYSTEM
4.4 CC-Link Connection (Via G4)
4.4 CC-Link Connection (Via G4)
This section explains the CC-Link connection (via G4) that connects the GOT to the AJ65BT-G4-S3 of the CC-Link
network.
The following shows an example of connecting the GOT to the AJ65BT-G4-S3 of the CC-Link network.
(1) Connection method
Connect the AJ65BT-G4-S3 of the CC-Link network to the GOT.
For details, refer to the following.
14. CC-Link CONNECTION (Via G4)
(2) GT Designer3 setting
Set GT Designer3 as follows.
*1 GT14, GT11, and GT10 are not compatible with MELSEC-QS.
*2 Only master station can be monitored in GT11 and GT10. The setting of GT Designer3 is not necessary.
Setting item Settings Model
Controller Type
GT16, GT15, GT12: MELSEC-QnA/Q/QS, MELDAS C6*
GT14, GT11: MELSEC-QnA/Q, MELDAS C6*
*1
GT10: MELSEC-QnA/Q
*1
Device setting (Network setting) Host
*2
Q Redundant Setting Do not set the item.
Monitor target
Po
w
e
r
s
up
pl
y
mo
d
u
le
MELSECNET/H remote I/O network
GOT
Network No. 0, Station No. 0
(Master station)
Control
system
(System A)
Em
pt
y
Q25PRHCPU QJ71LP21-25 QJ71BR1
1
QJ71E71-100 QJ61BT1
1N
Em
p
ty
Standby system
(System B)
Q25PRHCPU QJ71LP21-25 QJ71BR1
1
QJ71E71-100 QJ61BT1
1N
QJ72LP25-25 QJ71C24N
CC-Link
Network No. 0, Station No. 1
(Standby master station)
Network No. 0, Station No. 2
(AJ65BT-G4-S3)
Po
w
e
r
s
up
pl
y
m
odu
le
P
ow
e
r
s
up
pl
y
mo
d
u
le
Em
p
ty
Em
p
ty