Mitsubishi Electric GOT 1000 Series, Connection Manual

Page: 364 / 436

11 - 30
11. CONNECTION TO CHINO CONTROLLER
11.5 Controller Side Setting
11.5.10 Connecting to KE3000

Key Lock setting
To write the Digital and the Analog parameters, set the
Key Lock setting.

Communication settings
Make the communication settings by operating the
switches SW2 and SW3 of the module.
(1) Setting by SW2
*1 Adjust the settings with GOT settings.
*2 When the transmission code is MODBUS RTU, the setting of
the transmission character structure is fixed.
(2) Setting by SW3
Set the station No. as follows.
*1 Avoid duplication of the station No. with any of the other
units.
11.5.11 Connecting to LE5000

Key Lock setting
To write the Digital and the Analog parameters, set the
Key Lock setting.

Communication settings
Set the communication settings with controller key
operation.
*1 Avoid duplication of the station No. with any of the other
units.
*2 Adjust the settings with GOT settings.
Item Set value SW2-2 SW2-3
Transmission code
*2
MODBUS RTU OFF -
Transmission speed
*1
9600bps - OFF
19200bps - ON
Transmission character
structure
*2
8bits, None, 1bit (fixed) - -
SW3-4 SW3-5 SW3-6 SW3-7 SW3-8
Station No.
*1
OFF OFF OFF OFF OFF 1
ON OFF OFF OFF OFF 1
OFF ON OFF OFF OFF 2
ON ON OFF OFF OFF 3
:
:
ON OFF ON ON ON 29
OFF ON ON ON ON 30
ON ON ON ON ON 31
Printed wiring board
in main body
Front panel
SW3 SW2
Item Set value
RTU/ASCII RTU
Station No.
*1
1 to 99
Transmission speed
*2
9600bps, 19200bps
Character
*2
(Bit length, Parity bit, Stop bit)
[8N1]: 8bit, None, 1bit
[8N2]: 8bit, None, 2bit
[8E1]: 8bit, Even, 1bit
[8E2]: 8bit, Even, 2bit
[8O1]: 8bit, Odd, 1bit
[8O2]: 8bit, Odd, 2bit