Mitsubishi Electric GOT 1000 Series, Connection Manual

Page: 334 / 436

10 - 16
10. CONNECTION TO SHINKO TECHNOS INDICATING CONTROLLER
10.7 Precautions
10.7 Precautions

Station number settings of indicating
controller
In the system configuration, the indicating controller
with the station number set with the host address must
be included.
For details of host address setting, refer to the
following.
10.4.1 Setting communication interface
(Communication settings)

GOT clock control
Since the indicating controller does not have a clock
function, the settings of [time adjusting] or [time broad
cast] by GOT clock control will be disabled.

When using the communication converter IF-
400
When using the communication converter IF-400, some
communication error may occur.Set the number of
retries to more than one time.

Disconnecting some of multiple connected
equipment
The GOT can disconnect some of multiple connected
equipment by setting GOT internal device.For example,
the faulty station where a communication timeout error
occurs can be disconnected from connected
equipment.
For details of GOT internal device setting, refer to the
following manual.
GT Designer3 Version1 Screen Design Manual