Mitsubishi Electric GOT 1000 Series, Connection Manual

Page: 329 / 436

10. CONNECTION TO SHINKO TECHNOS INDICATING CONTROLLER
10.3 Connection Diagram
10 - 11
9
CONN
E
C
TION
T
O
S
H
ARP PLC
10
C
O
NN
ECTI
ON
T
O
SHI
N
KO
TECHN
OS IN
DIC
ATI
NG
C
O
NT
ROLLE
R
11
CONNECTION T
O
CH
INO
CONTROLLE
R
12
CONNECTION T
O
T
O
SHI
B
A
PL
C
13
CONNECTION T
O
T
O
SH
IB
A M
A
C
H
IN
E
PLC
14
CONNECTION T
O
P
A
NA
SONIC S
E
R
V
O
A
M
PL
IF
IE
R
15
CONNE
CTION T
O
PA
NA
SONIC
INDUSTRI
AL
DE
VI
CES
SU
NX
PLC

Precautions when preparing a cable
(1) Cable length
(a) The length of the RS-485 cable used for direct
connecting the indicating controller to the
communication converter
The length of the RS-485 cable must be 1200m or
less.
(b) The length of the RS-485 cable used for direct
connecting the indicating controller to GOT
The length of the RS-485 cable must be 500m or
less.
(2) GOT side connector
For the GOT side connector, refer to the following.
1.4.1 GOT connector specifications
(3) Shinko Technos indicating controller side connector
Use the connector compatible with the Shinko Technos
indicating controller side.
For details, refer to the user's manual of the Shinko
Technos indicating controller.

Connecting terminating resistors
(1) GOT side
When connecting a Shinko Technos indicating
controller to the GOT, a terminating resistor must be
connected to the GOT.
(a) For GT16, GT15, GT12
Set the terminating resistor setting switch of the
GOT main unit to "100 OHM".
(b) For GT14, GT11
Set the terminating resistor selector to "330 Ω ".
For the procedure to set the terminating resistor, refer
to the following.
1.4.3 Terminating resistors of GOT
(2) Shinko Technos indicating controller side
When connecting a Shinko Technos indicating
controller to the GOT, a terminating resistor must be
connected to the Shinko Technos indicating controller.
User's Manual of the Shinko Technos indicating
controller